Selelekela

Shanghai Muxiang Environmental High-Tech Co., Ltd. e thehiloeng ka 2006, ke Khoebo ea High-Tech e shebaneng le mechine le lisebelisoa tse ikemetseng tse thehiloeng Chaena 'me li shebane le lefats'e.Khamphani e kopanya mekhoa e mecha, tlhahiso, thekiso le litšebeletso.Ke moetsi ea ka sehloohong oa lisebelisoa tsa boiketsetso naheng ea China.Tsamaiso ea mantlha ea k'hamphani ea rona e tsoa ho batsamaisi ba lik'hamphani tse thathamisitsoeng tse nang le boiphihlelo bo bongata ba botsamaisi.Sehlopha sa R&D se entsoe ka lienjiniere tse nang le boiphihlelo bo fetang lilemo tse leshome ho lisebelisoa tsa R&D le tlhahiso.Ka bokhoni ba indasteri bo itlhommeng pele ba R&D le boiphihlelo ba lilemo tse fetang leshome tsa ho sebeletsa bareki ba maemo a holimo ba ka bang 1,000, re na le theknoloji e etellang pele ea R&D China.Lipatente tse ka bang 50 ke tsa k'hamphani, 'me sekhahla sa thoriso se phahameng sa sehlahisoa se feta 95%.Khamphani ea rona e hlophisitse morero o latelang bakeng sa k'hamphani ea hau.

Tlhaloso ea Tsamaiso: Kenyelletsa spiral conveyor le telescopic conveyor.

Mokhoa oa theknoloji: Beha thepa ka letsoho ho spiral conveyor, Lisebelisoa li theosa ho tloha mokatong oa boraro ho ea mokatong oa pele ebe u kenya mochini oa telescopic.

1.Lintlha tsa motheo tsa moralo

1.1Motheo tlhahisoleseding

Litaba tsa Ntho	Lintlha tsa Motheo	Ramark
Sebaka sa ho kenya
mocheso	-5ºC -45ºC
Mongobo	5% ~95% (Ha ho condensation)
Lerata	≤75db
Matsatsi a Tshebetso	Matsatsi a 7 ka beke
Lihora tsa ho sebetsa	Lihora tse 16 ka letsatsi;
Matla a sebetsang	3-mohato 380 VAC ± 10%, 50HZ ± 1HZ	Mohala oa fatše le terata ea zero e tla ba ka thata

 

							e arohane, 'me boleng ba ho hanyetsa motheo ha boa lokela ho feta 4 Ω
	Litlhoko tsa ts'ireletso	IP55 bakeng sa motlakase, IP65 bakeng sa sesebelisoa sa tšimo le sensor, IP54 bakeng sa khabinete ea taolo le phanele ea ts'ebetso;
	Lihlahisoa tse tsamaisoang	Phofo ea koro 1200(L)*700(W)	PP	lohiloe	mokotla	,
	Boima ba sehlahisoa	MAX.70kg
	Mokhoa oa lipalangoang	Ho fepa ka letsoho, 10 bat ka motsotso.

 

1.2 Litlhoko tse tsamaellanang le lisebelisoa

Tlhokahalo ea sebaka 

Boholo ba ho bula fatše: 2800 * 2800

● Phepelo ea motlakase ditlhoko

Kakaretso ea motlakase:380VAC ± 10%, 50Hz ± 1Hz, tsamaiso ea terata ea mekhahlelo e meraro;

Phepelo ea motlakase e thusang:220VAC ± 10%, 50Hz ± 1Hz, tsamaiso e le 'ngoe ea terata e le' ngoe;

● Tikoloho ya tshebetso ditlhoko 

Mocheso oa tikoloho ea ka tlung:-5℃–45 ℃

Mongobo o kahare: 5% -95%, ha ho condensation;

● Boenjiniere ba sechaba ditlhoko

Mochini oa screw o ts'oaroa ke k'hemik'hale ea anchor bolt M12 + top diagonal rod, e tsitsitseng ha ho buloa moaho oa liphaseje.

1.Thepa e entsoe ka poleiti ea tšepe e sa hloekang ea 304.

2.Bophara ba spiral slide ke 1000 mm.

3.Sekhahla sa spiral slide ke 3000mm.

4. Phapang pakeng tsa ho kena le ho tsoa ha spiral slide ke 5800 mm

5.Bolelele ba monyako oa li-slide tse spiral ho tloha mokatong oa boraro ke 800mm

6.Bophahamo ba spiral slide exit ho tloha mokatong o ka tlase ke 1000mm

7.Ho kena le ho tsoa ha spiral slide li hlophisitsoe ka likhato tse 180

8.Tsamaiso ea ho matha ea thepa e holim'a sekoti e tsamaisana le oache.

9. Mokotla oa tsela ea spiral slide e 1000 mm ka holim'a lefatše, 'me conveyor ea lebanta la telescopic e hokahane ka tlase.

10.The spiral slide e tlanngoe ke sekoti sa flange butting, se loketseng ho kenngoa.E loketse ho kenya modular le splicing sebakeng se senyenyane.

Tlhaloso ea lintlha tsa tekheniki:

1.Lihlahisoa tse tsamaisoang

1.1Lebitso la Sehlahisoa:lebokose kapa sehlahisoa sa mokotla

1.2Boholo ba sehlahisoa:(bolelele x bophara x bophahamo) bo fanoang ke bareki

1.3Boima ba 'meleboima: 70kg / karolo.

1.4Ho tsamaisa nako: likotoana tse 10 / min.

2.Litlhoko tsa mantlha tsa lebanta la telescopic morekisi

2.1 maemo a 4 likarolo, 6 limithara tsa 'mele, 12 limithara tse katoloso, 18 limithara tse ka kakaretso.

2.2Bophara ba lebanta 800 limilimithara.

2.3bophahamo ba mochine oa telescopic900 limilimithara.

3.Taolo le ts'ebetso

3.1Motlakase oa mantlha:380V, 3Ph, 50Hz

3.2Khokahano ea mantlha ea matla:phepelo ea motlakase e ikemetseng e fanoang ke bareki

3.3Matla a ho laola: 24dc

3.4Setopo sa tshohanyetso:2 ka kakaretso, khetla e kholo e le 1 le 1 pheletsong e ka pele

3.5Lebelo la lebanta:20-45m / min

3.6Tataiso ea ts'ebetso:pele / kgutlela morao

3.7Matla 2.2kW;

3.8Belt drive:koloi ea phokotso e khanna rolara ka ketane ea sprocket.

3.9Lebelo la ho otlolla:11m / mets;

3.10Matla 0.75kw;

3.11Taolo ea katoloso:tobetsa konopo e ka pele ea mochine;

3.12Taolo ea ho khutlisa:tobetsa konopo e ka pele ea mochine;

3.13Emergency retraction:switjha e ka pele ea bumper;

3.14Leseli: Mabone a 2 karolong e ka pele

3.15Maikutlo a sehlahisoa:e kentsoeng pheletsong e ka pele

3.16Lekhotla la taolo:e kentsoeng pheletsong e ka pele ea foreimi e kholo

4.Maemo a ho sebetsa a lisebelisoa le lisebelisoa

4.1Phepelo ea motlakase:tsamaiso ea terata ea mekhahlelo e meraro;

4.2Palo ea li-volts: 380V ± 10%;Khafetsa: 50 Hz ± 2%;

4.4Thempereichara ea tikoloho:lehlabula ≤ 45 ℃, mariha ≥ - 30 ℃;

4.5Mongobo oa tikoloho:mongobo o lekanyelitsoeng ≤ 79%;

5.Tšireletseho ea lisebelisoa le tshireletso

5.1 Moralo oa thepa le meaho o tla tsamaellana le maemo a morao-rao a tšireletso a machaba a tšireletso;

5.2 Thepa le lisebelisoa li tla ba le lisebelisoa tse phethahetseng tsa ts'ireletso;

5.3 Tšireletso e arohaneng bakeng sa likarolo tse tsamaeang le oli, metsi, khase, lithapo, likhoele, joalo-joalo

5.4 Lerata la lisebelisoa le lisebelisoa tse sebetsang ≤ 80dB (a);

5.5 Thepa le lisebelisoa li tla ba le konopo ea ho emisa ts'ohanyetso kapa switch ha ho hlokahala, e tla kenngoa sebakeng se loketseng ho sebetsa ka 'mala o khanyang;

5.6 Mmala oa terata le sesebelisoa sa mabone ke 'mala oa temoso kapa' mala oa temoso;

5.7 Mebala ea polokeho joalo ka sesupo sa polokeho le lets'oao la polokeho li lumellana le maemo a naha a iso3864;

6.Phekolo ea holim'a lisebelisoa le lisebelisoa

6.1 Lifaele tsa tšepe tse ntšo le litšepe tsa tsona, meaho ea tšepe ea maqephe le litšepe tsa tsona holim'a lisebelisoa le lisebelisoa li tla phekoloa ka ho fafatsa ka polasetiki;

6.2 'Mala oa ponahalo ea lisebelisoa le lisebelisoa li tla tšoaroa ka mokhoa o tiileng

ka karete ea mebala e fanoeng konteraka, le mebala e fapaneng e hlokahalang bakeng sa moralo oa mohlala e tla amoheloa ke Mokha oa A;

6.3 Bokaholimo ba likarolo tsa phetiso bo tla ntšofala kapa bo benngoe ka masenke;

6.4 Likarolo tse tloaelehileng tse rekiloeng li tla itšetleha ka 'mala oa mantlha;(kapa e rekiloe ho latela morero o ka sebelisoang ke Mokha oa A)

6.5 'Mala oa terata le sesebelisoa sa tšireletso ke' mala oa temoso kapa 'mala oa temoso;kapa mmala o sisintsweng ke Mokga wa A;

7.Moqapi oa lisebelisoa molao-motheo

7.1 Conveyor e na le ponahalo e ntle, sebopeho sa compact, ts'ebetso e bonolo le tlhokomelo, 'me e finyella litlhoko tsa ergonomics;

7.2 Sebopeho sa phetisetso sea utloahala, ts'ebetso e tsitsitse mme ketso e ka tšeptjoa;

7.3 Lisebelisoa tsa motlakase tsa pele li tla etsoa le ho khethoa ho latela konteraka e tiileng ho netefatsa botsitso bo phahameng, botšepehi le polokeho ea tsamaiso eohle ea taolo;

7.4 Bonolo ba lipalangoang le ho kenya li tla nkoa ka hohle kamoo ho ka khonehang moralong oa lisebelisoa le lisebelisoa;

7.5 Tiisetso ea ho fana ka lisebelisoa tsa tlhahiso ea theko e tlaase motheong oa kopano ea ts'ebetso ea tlhahiso, tlhahiso, tsamaiso le tlhokomelo;

8.Taolo ea motlakase

8.1 khetho ea motlakase

8.1.1 Matla a lekantsoeng a enjene a kopana le litlhoko tsa mojaro, 'me matla a enjene, se fokotsang le ho fetolela maqhubu a lumellana le tšebetso;

8.1.2 ho latela maemo a tikoloho a Mokha oa A, khetha mokhoa o nepahetseng oa moea, sebopeho sa sebopeho le boemo ba tšireletso;

8.1.3 The margin coefficient ea motlakase oa mekhahlelo e meraro ke 1.5-2.0, 'me ho phahama ha mocheso nakong ea ts'ebetso ea nako e telele ha hoa lokela ho feta 65 ℃ (Grade E) le 70 ℃ (Grade B);

8.2 khetho le ho kenya likarolo tsa motlakase

8.2.1 Potoloho e na le ts'ebetso e fetang ea hona joale, tahlehelo ea mokhahlelo, boima bo feteletseng le mesebetsi e meng ea ts'ireletso.Bokhoni ba switjha bo lokela ho khethoa ka nepo, 'me matla a mangata a be a lekaneng;

8.2.2 Lisebelisoa tsa mantlha tsa motlakase li tla hlophisoa ka tatellano ka matšoao a hlakileng.Lisebelisoa tsa mantlha tsa motlakase le li-terminal li tla hokeloa ka ho tobetsa ka mokhoa o batang ka li-lugs, 'me mohala o tla tiea ntle le ho hlephisa, ho robeha kapa ho lutla;

8.2.3 Ho sebelisoa trunking ea polasetiki ka lebokoseng la taolo, 'me nomoro ea mohala, phanele ea taolo le label li hloekile ebile li hlakile.

8.2.4 Ho kenngoa ha lisebelisoa tsa motlakase ho tla lumellana le litlhaloso tsa theknoloji ea ho kenya, ka sesebelisoa se ka tšeptjoang sa ho theola fatše, ho hanyetsa fatše ≤ 4 Ω, le ho hanyetsa ho ts'oaroa ha tsamaiso ea motlakase ho ea fatše ≥ 50m Ω;